Skip to content

Construction time tracking

Construction time tracking for crews that move between job sites.

Your crew clocks in on their phones or on a shared tablet at the job site. Every hour is tagged to a job and a task, off-site clock-ins are blocked for the employees you choose, and the approved week goes to payroll as a file your payroll system imports.

14 days free · No credit card required · Cancel anytime

4:06
Clox.
Marcus Bell
Donovan Electric
ON THE CLOCK
6:24:17
Adjust start time
Service Calls
Take break
Hold to clock out
All punches synced
Recent shifts
Mon, Jun 15
7:01 AM to 3:32 PM · Service Calls
8h 31m
Sun, Jun 14
7:00 AM to 2:00 PM · Maple Street Panel Replacement
7h 0m

The problem

Construction hours are hard to collect because the work moves.

A crew starts at one address, picks up material, and finishes the day at another. Signal drops in basements and on rural lots. Some sites do not allow phones on the deck. By Friday the week is spread across paper timecards, a foreman's notes and a text thread, and someone has to add it up and type it into payroll.

Clox records the punch where the work happens and keeps the job attached to every hour. The timesheet you approve on Friday is the one payroll uses, and labor cost per job is a number in Reports instead of a guess.

What you get

What Clox does for a construction crew.

Every feature below is on the one Clox plan. Nothing is held back for a higher tier.

Clock in on a phone or a shared tablet

Employees clock in and out with one tap in the Clox app on iPhone or Android. For crews that share a device, or sites that do not allow phones, set up a tablet as a kiosk where each employee types a PIN. The company can also require a clock-in photo.

A geofence around each job site

Set a GPS radius around every job site. For employees assigned to the site with their geofence switch on, which is the default, a clock-in from outside the radius is blocked. The location comes from the phone, so the geofence is a deterrent, not proof.

Every hour tagged to a job and a task

Employees pick the project and task when they clock in, and they can switch projects during the shift without clocking out. Categories group projects into departments, and Reports show hours and labor cost per job and per department.

Punches saved when there is no signal

If there is no signal, the punch is saved on the phone and sent to Clox once the app is open with a signal. A punch saved offline that breaks a rule, such as the job site check, waits for the manager instead of landing on the timesheet.

Overtime and lunch rules applied for you

Set each employee's overtime rule and automatic lunch deduction once, and choose standard or California overtime for the company. Clox splits regular and overtime hours on the timesheet.

Payroll exports with no retyping

Export the approved week for QuickBooks Online, QuickBooks Desktop, ADP RUN, ADP Workforce Now, Paychex Flex or Gusto, or as a payroll summary CSV for any other system. QuickBooks Online can also be connected, so you send the approved hours from Clox without a file.

In the Clox web app

What the manager sees.

Timesheets

Approve the week, then export it

Clox lays out every shift, break and overtime hour by week. You fix a wrong punch, add one someone forgot, close a shift that was left open, and approve. The audit log keeps who changed what, and when.

app.getclox.com/timesheet
Clox
TodayTimesheetScheduleTime OffMore ▾
Your timesheet
Click any shift to edit. Switch between day, week, month, or a custom range.
DayWeekMonthCustom
←→Jun 15 to Jun 21
MON
15
8h 12m
TUE
16
7h 45m
WED
17
8h 00m
THU
18
8h 03m
FRI
19
8h 06m
SAT
20
0h 00m
SUN
21
Shifts+ Add manuallySelect
Fri, Jun 19
7:02 AM to 3:28 PM · Riverside Heights Rough-In
Approved8h 06m
Thu, Jun 18
6:58 AM to 3:31 PM · Maple Street Panel Replacement
Approved8h 03m
Wed, Jun 17
7:00 AM to 3:30 PM · Maple Street Panel Replacement
Pending8h 00m
Tue, Jun 16
6:55 AM to 2:40 PM · Service Calls
Pending7h 45m

Worksites

Set a geofence for each job site

Add a job site by address and set its radius. For the employees you choose, a clock-in from outside the radius is blocked. The check happens at clock-in only. Clox does not follow anyone during the shift.

app.getclox.com/worksites
Clox
TodayTimesheetScheduleWorksitesMore ▾
Worksites
Workers can only clock in once they're inside the geofence.
ListMap
Riverside Heights
1820 Frelinghuysen Ave, Newark
40.7357, -74.1724
3 on site160 m
Hudson Yards Tower B
30 Hudson Yards, New York
40.7536, -74.0014
2 on site180 m
Brookfield Service Yard
55 Trumbull St, Elizabeth
40.6639, -74.2107
0 on site140 m

Reports

See what each job cost in labor

Reports total the hours and labor cost on each project and department for the dates you pick, using the hourly rate you set for each employee. That is the number you need when you bid the next job.

app.getclox.com/reports
Clox
TodayTimesheetScheduleTime OffTeamProjectsWorksitesReportsMore ▾
?FrankFD
Manage
Reports
Aggregate hours across your team. Spot overtime before it becomes a payroll surprise.
Dates: Last week ▾
Just meAll staff
Export ▾
SummaryDetailed
FiltersDisplay ▾
Total team hours
129h 59m
125h 3m regular · 4h 56m overtime
Estimated payroll
$5,344
Regular plus overtime at each person’s saved rate.
Hours by employee
Frank Donovan
39h 19m · 2h 28m OT
Jordan Avery
34h 28m · 2h 28m OT
Diego Ramirez
14h 4m
Renee Okafor
13h 46m
Priya Patel
8h 12m
Marcus Bell
8h 10m
Cody Nguyen
7h 45m
Tasha Coleman
4h 15m
app.getclox.com/reports
CloxFD
Reports
Dates: Last week ▾
Just meAll staff
Export ▾
SummaryDetailed
Display ▾
Total team hours
129h 59m
125h 3m regular · 4h 56m overtime
Estimated payroll$5,344
Hours by employee
Frank Donovan
39h 19m2h 28m OT
Jordan Avery
34h 28m2h 28m OT
Diego Ramirez
14h 4m
Renee Okafor
13h 46m
Priya Patel
8h 12m

Buying checklist

What to check before you choose a construction time clock app.

These are the questions that decide whether a time clock works on a construction crew. The right column is how Clox answers each one.

WHAT TO CHECKWHY IT MATTERSCLOX
It works without signalBasements, steel buildings and rural lots lose signal, and a missed punch becomes a Friday argument.If there is no signal, the punch is saved on the phone and sent to Clox once the app is open with a signal.
It blocks off-site clock-insA clock-in from the truck, the supply house or home adds paid minutes every day.A geofence per job site blocks clock-ins from outside the radius for the employees you choose.
Hours land on a job and a taskWithout the job on every hour, you cannot see labor cost per job or bid the next one from real numbers.Every hour carries a project and a task, and employees can switch projects mid-shift.
There is an option without smartphonesNot every employee has a smartphone, and some sites ban phones.Kiosk mode on a shared tablet, with a PIN for each employee and an optional clock-in photo.
The export fits your payrollRetyping hours into payroll is where most mistakes happen.Exports for QuickBooks Online and Desktop, ADP RUN and Workforce Now, Paychex Flex, Gusto, and a payroll summary CSV.
The price is clear for your crew sizeBase fees, tier gates and add-ons make a low per-user price hard to compare.One plan with every feature: $29 a month includes the first 3 users, then $6 per user.
There is no long contractA multi-year term is hard to undo if the crew does not use the app.A 14-day trial with no credit card, then monthly or annual billing. Cancel anytime.
You can show the record to someone elseClients, auditors and insurance carriers ask for hours you can back up.An audit log of every change, PDF and CSV exports, and signed records anyone can check at getclox.com/verify.

Limits

What Clox does not do.

It is better to know this before the trial than after it.

  • Clox does not run payroll and does not produce certified payroll reports. It exports the hours your payroll system or accountant works from.
  • Clox keeps one hourly rate and one overtime multiplier per employee. If one person is paid different rates on different jobs, the hours by job are in the export and your payroll system applies the rates.
  • Clox does not track equipment, write daily logs or build estimates. It is a time clock with job costing, schedules and time off.
  • The geofence is a deterrent, not proof, because the location comes from the phone. Kiosk punches skip the geofence.

Comparisons

How Clox compares with construction time clocks.

Each comparison uses prices and features read from the vendor's own pages, with the date they were read.

Pricing

$29 a month includes 3 users, then $6 per user.

One plan, every feature included. Here is the monthly price for a few crew sizes. Annual billing costs less, and the pricing page shows the total for your crew.

5 USERS
$41 a month
10 USERS
$71 a month
20 USERS
$131 a month

The trial is 14 days with no credit card, and your first paid subscription has a 30-day money-back guarantee.

Questions

Questions buyers ask.

Can construction workers clock in without a smartphone?

Yes. Set up a shared tablet at the job site in kiosk mode, and each employee clocks in with their name and a PIN. Employees who have a phone but do not want to install anything can clock in from a phone browser at app.getclox.com.

Does Clox work on job sites with no cell signal?

If there is no signal, the punch is saved on the phone and sent to Clox once the app is open with a signal. A punch that breaks a rule while offline, such as the job site check, waits for the manager. The shared tablet kiosk needs a connection to record a punch. How offline punches work

How does Clox stop employees clocking in from home or the truck?

Set a geofence, a GPS radius, around each job site. For employees assigned to that site with their geofence switch on, a clock-in from outside the radius is blocked. The location comes from the phone, so it is a strong deterrent rather than proof. How the GPS time clock works

Can I track labor cost per job?

Yes. Every hour is tagged to a project and a task, and Reports show the hours and labor cost on each project and department for any date range, using the hourly rate you set for each employee. How to calculate labor cost per job

Which payroll systems does Clox work with?

Clox exports files for QuickBooks Online, QuickBooks Desktop (IIF), ADP RUN, ADP Workforce Now, Paychex Flex and Gusto, plus a payroll summary CSV for any other system. QuickBooks Online can also be connected, so you send the approved hours from Clox without a file. There is also Zapier and a read-only API.

Does Clox handle certified payroll or prevailing wage reports?

No. Clox does not produce certified payroll or prevailing wage reports. It keeps hours by person and project, so you can export records for your payroll system or accountant, or pull them for a workers' comp or DOL audit.

How much does Clox cost for a construction crew?

$29 a month includes the first 3 users, then $6 per user, with every feature included. A crew of 10 is $71 a month on monthly billing. Annual billing costs less, and the pricing page shows the total for your crew size. See pricing for your crew size

Is there a contract or a setup fee?

No. The trial is 14 days with no credit card, there is no setup fee or sales call, and you can cancel anytime. Your first paid subscription has a 30-day money-back guarantee.

Read more

Guides for construction crews.